Ask The Trades - replacing a radiator

Welcome, Guest. Please Login or Register

	Jun 19^th, 2026, 10:04am
View recently thanked users View top thanked users

Quote: One step beyond.....

Ask The Trades › DIY Forum › Plumbing Questions › replacing a radiator

(Moderator: thescruff) - (Moderator Group: Board Moderator)

< Previous Topic | Next Topic >

Pages: 1

replacing a radiator (Read 5601 times)

wretch GDPR opt-out	replacing a radiator Sep 24^th, 2006, 12:44pm i have removed a radiator to decorate my kitchen.i have a new worcester 30ci combi.can anyone please advise me what to do when i replace the radiator as presumably the water level in the system will be low and what is the procedure for bleeding the rads? best regards wretch
Back to top	IP Logged

thescruff Global Moderator Trade Member Author Offline Who said plumbing was easy. Posts: 6037 Total Thanks: 147 For This Post: 0 Gender: Trade: Plumber	Re: replacing a radiator Reply #1 - Sep 24^th, 2006, 4:25pm would that be the cdi or the CBi
Back to top	IP Logged

wretch GDPR opt-out Total Thanks: 147 For This Post: 0	Re: replacing a radiator Reply #2 - Sep 25^th, 2006, 8:35pm apologies scruff its a greenstar 30si best regards wretch
Back to top	IP Logged

thescruff Global Moderator Trade Member Author Offline Who said plumbing was easy. Posts: 6037 Total Thanks: 147 For This Post: 0 Gender: Trade: Plumber	Re: replacing a radiator Reply #3 - Sep 25^th, 2006, 11:32pm www.worcester-bosch.co.uk then look up literature, greenstar 30Si, installation and service instructions. or email me and Ill send you a copy. Your looking for a filler loop, or a Tbar key if fitted as an extra.
Back to top	IP Logged

Twobarrows

GDPR opt-out

Total Thanks: 147
For This Post: 0

Re: replacing a radiator
Reply #4 - Sep 27^th, 2006, 8:46am

Quote:

i have removed a radiator to decorate my kitchen.i have a new worcester 30ci combi.can anyone please advise me what to do when i replace the radiator as presumably the water level in the system will be low and what is the procedure for bleeding the rads?

best regards

wretch

If it's not a cheap & nasty rad you can put it back in place & connect tails, then (almost) fill the rad from the top using a funnel & piece of hose or suitable old fitting; then wou will have very little to bleed.

IP Logged

wretch GDPR opt-out Total Thanks: 147 For This Post: 0	Re: replacing a radiator Reply #5 - Sep 28^th, 2006, 11:27pm thanx twobarrows all my stuff is cheap and nasty.seriously its a good idea and i took scruffs advise and rtfm.now i know what the filling loop is for,its for filling it! best regards wretch
Back to top	IP Logged

Pages: 1

(Moderator: thescruff) - (Moderator Group: Board Moderator)

< Previous Topic | Next Topic >

Ask The Trades › DIY Forum › Plumbing Questions › replacing a radiator