Ask The Trades - problem turning on the hot taps starts shower leak

Welcome, Guest. Please Login or Register

	Jun 10^th, 2026, 5:01pm
View recently thanked users View top thanked users

Quote: Never look down on anybody unless you're helping him up - Jesse Jackson

Ask The Trades › DIY Forum › Plumbing Questions › problem turning on the hot taps starts shower leak

(Moderator: thescruff) - (Moderator Group: Board Moderator)

< Previous Topic | Next Topic >

Pages: 1

problem turning on the hot taps starts shower leak (Read 4644 times)

mikestr555 GDPR opt-out	problem turning on the hot taps starts shower leak Apr 13^th, 2007, 9:23pm Hi all the problem is that when any of the hot taps are turn on the shower start to flow. it starts as a solw drible and work up to a small flow. I think its the shower mixer unit. ant ideas weclome thanks mike
Back to top	IP Logged

thescruff Global Moderator Trade Member Author Offline Who said plumbing was easy. Posts: 6037 Total Thanks: 147 For This Post: 0 Gender: Trade: Plumber	Re: problem turning on the hot taps starts shower Reply #1 - Apr 13^th, 2007, 10:33pm Em April 1st has gone, and you sound quite serious, I won't say impossible, so convince me best to start with the shower valve make and model, followed by the hot and cold supplies, are they tank fed or mains, do you have a combi or cylinder, and is it unvented or do you have storage tanks.
Back to top	IP Logged

mikestr555 GDPR opt-out Total Thanks: 147 For This Post: 0	Re: problem turning on the hot taps starts shower Reply #2 - Apr 14^th, 2007, 9:07pm Hi Thescruff Its not mind, but I am going there on Tuesday so I find out all that info for you and thanks for replying thanks mike
Back to top	IP Logged

mikestr555 GDPR opt-out Total Thanks: 147 For This Post: 0	Re: problem turning on the hot taps starts shower Reply #3 - Apr 17^th, 2007, 5:48pm Hi thescruff the shower is mira 415 and the combi boiler is vokera excell 96e hope this helps to work out what it could be thanks mike
Back to top	IP Logged

thescruff Global Moderator Trade Member Author Offline Who said plumbing was easy. Posts: 6037 Total Thanks: 147 For This Post: 0 Gender: Trade: Plumber	Re: problem turning on the hot taps starts shower Reply #4 - Apr 17^th, 2007, 10:37pm Whats the main pressure, pressure It could be you need Mira drop tight pressure reducing valves. I would be to ask Mira for any advise. 01224 221221, not sure of the web/email but a simple google should bring it up.
Back to top	IP Logged

billy GDPR opt-out Total Thanks: 147 For This Post: 0	Re: problem turning on the hot taps starts shower Reply #5 - Apr 18^th, 2007, 1:02am thats 01242 221221, only noticed cause 01224 is aberdeen and I'm sure I'd have known mira was here...
Back to top	« Last Edit: Apr 18^th, 2007, 1:03am by billyboy » IP Logged

mikestr555 GDPR opt-out Total Thanks: 147 For This Post: 0	Re: problem turning on the hot taps starts shower Reply #6 - Apr 19^th, 2007, 7:10pm Hi All thanks for the advice mike
Back to top	IP Logged

thescruff Global Moderator Trade Member Author Offline Who said plumbing was easy. Posts: 6037 Total Thanks: 147 For This Post: 0 Gender: Trade: Plumber	Re: problem turning on the hot taps starts shower Reply #7 - Apr 20^th, 2007, 6:31pm Do let us know what they say please.
Back to top	IP Logged

mikestr555

GDPR opt-out

Total Thanks: 147
For This Post: 0

Re: problem turning on the hot taps starts shower
Reply #8 - Apr 25^th, 2007, 8:11pm

Hi All

Mira have been very helpful this is what there email back:
The reported symptom sounds likely to indicate a failure of the diaphragm within the shower’s internal mechanism, known as the cartridge. However, there is more than one cartridge available for the Mira 415 and it is imperative that you replace it like-for-like. Does the control knob on your shower have a red button at some point around its circumference, or is the control knob spring-loaded (i.e. can be pulled away from the body by approximately an inch)? If it has the red button you will require a black cartridge (part number: 902.55) whereas the spring-loaded version means you need a grey cartridge (part number: 902.91). Alternatively, please feel free to forward a digital photograph of the shower to this email address by return so that we may identify it that way.
plus the price
thank all
mike

IP Logged

Pages: 1

(Moderator: thescruff) - (Moderator Group: Board Moderator)

< Previous Topic | Next Topic >

Ask The Trades › DIY Forum › Plumbing Questions › problem turning on the hot taps starts shower leak