Ask The Trades - 415v 3 phase motor starter

Welcome, Guest. Please Login or Register

	Apr 11^th, 2026, 4:26pm
View recently thanked users View top thanked users

Quote: A conscience is what hurts when all your other parts feel so good.

Ask The Trades › DIY Forum › Electrical Questions › 415v 3 phase motor starter

(Moderator: Lectrician) - (Moderator Group: Board Moderator)

< Previous Topic | Next Topic >

Pages: 1

415v 3 phase motor starter (Read 5313 times)

lozz

GDPR opt-out

415v 3 phase motor starter
Apr 3^rd, 2009, 10:08pm

i have a 415v jetwash wired into a dol starter box with a contactor and overload, i have a automatic pressure cut off valve which i need to wire in, the pressure switch has 3 wires red, blue, and brown ive been told by someone one is norm open, norm closed, and line. i was told to break the coil with the pressure switch, then told by somone else to wire the pressure switch in parallel with the on switch im not sure witch one to go by any help appreciated

IP Logged

Zambezi

GDPR opt-out

Re: 415v 3 phase motor starter
Reply #1 - Apr 3^rd, 2009, 11:42pm

I would say you want the pressure switch to kill the control circuit when it reaches a certain pressure. You would wire the normally closed and line wires of the pressure switch in series with the coil (control) circuit, so when the pressure gets too high the normally closed becomes open thus killing the power to the coil.

I will probably read this in the morning and wonder what I was trying to say, it is too late and I need to sleep...........

IP Logged

lozz GDPR opt-out	Re: 415v 3 phase motor starter Reply #2 - Apr 4^th, 2009, 12:08am lol, if the control cut the power to the coil would the starter box need switching back on?
Back to top	IP Logged

Y3 GDPR opt-out	Re: 415v 3 phase motor starter Reply #3 - Apr 4^th, 2009, 8:33am You would have to manually switch it back on, thats the feature of a DOL starter.
Back to top	IP Logged

Lectrician

Administrator
Trade Member
Author

Offline

Ask The Trades
Posts: 8815

Total Thanks: 109
For This Post: 0

Braunton, North Devon
United Kingdom
Gender: male

Trade: Electrician

Re: 415v 3 phase motor starter
Reply #4 - Apr 4^th, 2009, 9:42am

What is the pressure switch actually doing?

You do say it is a 'cut off' pressure switch so I assuming that it is going to turn the compressor off when the hose or jet is closed and pressure rises. When a hose or jet is opened you want the compressor to run again.

You would be better with a 'plain boxed' DOL starter for this. One with no red/green buttons. You would then not wire a green start switch, and connect the pressure switch as a stop switch. The DOL starter should be set to the current of the compressor. If ever the pressure switch fails, the motor will labour when the presure gets too high and the overload will operate.

This DOL control starter would be best supplied via a second contactor which has a red/green stop/start and also some extra em stops dotted around if required.

Need to post a picture? Click HERE for info!

IP Logged

Zambezi

GDPR opt-out

Total Thanks: 109
For This Post: 0

Re: 415v 3 phase motor starter
Reply #5 - Apr 4^th, 2009, 10:50am

Quote:

lol, if the control cut the power to the coil would the starter box need switching back on?

Yes, you would have to push start again. It would work similar to an emergency stop button.
As Lec said what is the purpose of the pressure switch? There will be different ways of wiring it depending on what the switch is supposed to do.

IP Logged

Pages: 1

(Moderator: Lectrician) - (Moderator Group: Board Moderator)

< Previous Topic | Next Topic >

Ask The Trades › DIY Forum › Electrical Questions › 415v 3 phase motor starter