Ask The Trades - SWA to a shed?

Welcome, Guest. Please Login or Register

	Apr 6^th, 2026, 5:54am
View recently thanked users View top thanked users

Quote: I intend to live forever........So far, so good...

Ask The Trades › DIY Forum › Electrical Questions › SWA to a shed?

(Moderator: Lectrician) - (Moderator Group: Board Moderator)

< Previous Topic | Next Topic >

Pages: 1

SWA to a shed? (Read 7342 times)

JamieM

GDPR opt-out

SWA to a shed?
May 21^st, 2009, 10:21am

Hey guys I'm new to the forum. I'm Putting a new installation in to the shed. I've got a 2way Metal RCD with a 6amp Lighting And a Small Ring Final Coning Of. I've got 6mm SWA going to be run into there its only 5-6 M away from the house.

My question is where would the SWA be run into the house? would it be off a fused spur from the CCU?

any help would be appreciated thanks

IP Logged

greg GDPR opt-out	Re: SWA to a shed? Reply #1 - May 21^st, 2009, 7:49pm If you search the forum, shed / garage supplies have been covered before, may answer your question.
Back to top	IP Logged

GDPR opt-out

Re: SWA to a shed?
Reply #2 - May 21^st, 2009, 8:13pm

Quote:

My question is where would the SWA be run into the house? would it be off a fused spur from the CCU?

any help would be appreciated thanks

You could run it straight into your main consumer unit protected by an existing RCD or by installing an RCBO, a 20a rated MCB/RCBO respectively will be fine if your using equipment that isnt heavy in using current.

You could run it into an adaptable box external to your property, this adaptable box would have a supply from the main consumer unit using Twin & Earth cable.

You need to make sure the protective bonding conductors have been installed to the water and gas services, if they apply, before work commences.

Whats your earthing arrangement, TNS, TN-C-S, TT?

What is your shed made of? Does it have any metallic services in it i.e, water pipe?

You need to make sure your installation can handle the additional load as well.

« Last Edit: May 21^st, 2009, 9:22pm by Lectrician »

IP Logged

baz Trade Member Offline If it ain't broke, keep fixing it until it is! Posts: 258 Total Thanks: 0 For This Post: 0 Henley-on-Thames United Kingdom Gender: Trade: Electrician	Re: SWA to a shed? Reply #3 - Jun 19^th, 2009, 11:55pm This arcticle may be of interest http://www.theiet.org/publishing/wiring-regulations/mag/2005/16-elect-inst-outdo... Note: its written to 16th edition.
Back to top	Why is it that, when we stumble across a can of worms, instead of running for the door we find ourselves reaching for a can opener? IP Logged

Brunokid GDPR opt-out Total Thanks: 0 For This Post: 0	Re: SWA to a shed? Reply #4 - Jun 20^th, 2009, 2:52pm Quote: You could run it straight into your main consumer unit protected by an existing RCD or by installing an RCBO, a 20a rated MCB/RCBO respectively will be fine if your using equipment that isnt heavy in using current. Why would you need RCD protection at your CU?
Back to top	« Last Edit: Jun 21^st, 2009, 6:31pm by Lectrician » IP Logged

GDPR opt-out

Total Thanks: 0
For This Post: 0

Re: SWA to a shed?
Reply #5 - Jun 20^th, 2009, 9:52pm

Quote:

Why would you need RCD protection at your CU?

Ha ha, you wouldnt if it were a TN system, however, if it was a TT system then the RCD protection would need to come from the main CU in the house, before the SWA feeding the metal CU in the shed. Whether or not thats with an existing 30mA rcd or if an RCBO needs to be fitted? Who knows?

« Last Edit: Jun 21^st, 2009, 6:32pm by Lectrician »

IP Logged

Brunokid GDPR opt-out Total Thanks: 0 For This Post: 0	Re: SWA to a shed? Reply #6 - Jun 21^st, 2009, 2:07pm Whether or not thats with an existing 30mA rcd or if an RCBO needs to be fitted? Are you sure about that?
Back to top	IP Logged

GDPR opt-out

Total Thanks: 0
For This Post: 0

Re: SWA to a shed?
Reply #7 - Jun 21^st, 2009, 8:05pm

Right ok, if it's a tn system and swa is used to supply the shed then the 30mA rcd can be put in the cu in the garage or it can be added at the main cu or come from the protected side of the splitload board, he has sockets in the shed so 30mA is required. If it's a TT system with a 100mA isolator, he still needs 30mA protection for the sockets in the shed, but I see what your pointing out and I feel like a numpty for missing it, he can have the 30mA rcd in the shed as the 100mA isolator is providing fault protection for the SWA and metal enclosure.

Thanx for doing it in a polite way, I don't know what's wrong with me sometimes, maybe my brain is coming to it's end Wink

IP Logged

Lectrician Administrator Trade Member Author Offline Ask The Trades Posts: 8815 Total Thanks: 109 For This Post: 0 Braunton, North Devon United Kingdom Gender: Trade: Electrician	Re: SWA to a shed? Reply #8 - Jun 21^st, 2009, 8:45pm Quote: I don't know what's wrong with me sometimes, maybe my brain is coming to it's end So soon?
Back to top	« Last Edit: Jun 21^st, 2009, 8:46pm by Lectrician » Need to post a picture? Click HERE for info! IP Logged

Y3 GDPR opt-out Total Thanks: 109 For This Post: 0	Re: SWA to a shed? Reply #9 - Jun 21^st, 2009, 9:08pm I wondered when you would turn up lec Surprised you weren't the first one to notice my error, you normally have the eye of an eagle where I'm concerned So soon you say? I'm now heading towards 40, I would say it was good timing!
Back to top	IP Logged

Pages: 1

(Moderator: Lectrician) - (Moderator Group: Board Moderator)

< Previous Topic | Next Topic >

Ask The Trades › DIY Forum › Electrical Questions › SWA to a shed?