Ask The Trades - Can I get RCBOs to fit in a Wylex consumer unit?

Welcome, Guest. Please Login or Register

	Apr 6^th, 2026, 6:51pm
View recently thanked users View top thanked users

Quote: One step beyond.....

Ask The Trades › DIY Forum › Electrical Questions › Can I get RCBOs to fit in a Wylex consumer unit?

(Moderator: Lectrician) - (Moderator Group: Board Moderator)

< Previous Topic | Next Topic >

Pages: 1

Can I get RCBOs to fit in a Wylex consumer unit? (Read 3642 times)

yoggo

GDPR opt-out

Can I get RCBOs to fit in a Wylex consumer unit?
May 26^th, 2009, 7:59pm

No space to do anything in cupboard such as put in a new cu, or even add separate rcd. Local suppliers say no but just wondering if anyone knows a way to do it. The cu in question is just a 2-way (Cat No 304) and is totally jammed between ceiling, wall, meter and large cu below and the cupboard itself occupies space between window and door. The lower part of the cupboard is totally occupied with 3-phase switchgear for off-peak heating and workshop

There could be an option to drill through wall at back of cupboard and put rcd or new cu containing rcd in another room - that does not appeal but would it be ok to do that if I have to?

IP Logged

yoggo GDPR opt-out	Re: Can I get RCBOs to fit in a Wylex consumer unit? Reply #1 - May 26^th, 2009, 8:01pm Additional info from Yoggo: I should have mentioned the 2-way cu has rewireable fuses at present.
Back to top	IP Logged

Lectrician Administrator Trade Member Author Offline Ask The Trades Posts: 8815 Total Thanks: 109 For This Post: 0 Braunton, North Devon United Kingdom Gender: Trade: Electrician	Re: Can I get RCBOs to fit in a Wylex consumer unit? Reply #2 - May 26^th, 2009, 8:15pm Similar to the below? Definantly not I'm afraid.
Back to top	« Last Edit: May 27^th, 2009, 3:31pm by Lectrician » Need to post a picture? Click HERE for info! IP Logged

plugwash Administrator Offline I love YaBB 1G - SP1! Posts: 1383 Total Thanks: 0 For This Post: 0 Trade: Not Specified	Re: Can I get RCBOs to fit in a Wylex consumer unit? Reply #3 - May 27^th, 2009, 2:56pm hmm, my searches seem to indicate that a wylex 304 is a three way not a two way. Do you actually have a three way with a blank in it or do you have some other model. What is this small CU being used for? what is the situation with the large CU below?
Back to top	IP Logged

Lectrician Administrator Trade Member Author Offline Ask The Trades Posts: 8815 Total Thanks: 109 For This Post: 0 Braunton, North Devon United Kingdom Gender: Trade: Electrician	Re: Can I get RCBOs to fit in a Wylex consumer unit? Reply #4 - May 27^th, 2009, 3:31pm The pic above is the good old 404 - a 4 way moulded. The 304 is indeed a 3 way, styled as above. The 104 is a 1 way, the 204 is the 2 way.
Back to top	« Last Edit: May 27^th, 2009, 3:33pm by Lectrician » Need to post a picture? Click HERE for info! IP Logged

Pages: 1

(Moderator: Lectrician) - (Moderator Group: Board Moderator)

< Previous Topic | Next Topic >

Ask The Trades › DIY Forum › Electrical Questions › Can I get RCBOs to fit in a Wylex consumer unit?