Ask The Trades - Baxi 105 HE flame failure

Welcome, Guest. Please Login or Register

	Jan 29^th, 2026, 7:01pm
View recently thanked users View top thanked users

Quote: History will be kind to me, for I intend to write it - Sir Winston Churchill

Ask The Trades › DIY Forum › Plumbing Questions › Baxi 105 HE flame failure

(Moderator: thescruff) - (Moderator Group: Board Moderator)

< Previous Topic | Next Topic >

Pages: 1

Baxi 105 HE flame failure (Read 6642 times)

CATTIG

GDPR opt-out

Baxi 105 HE flame failure
Jan 9^th, 2010, 4:03pm

Hi
We have developed a problem with our boiler today. It stopped working and the 30 degree fault light started flashing which is the flame failure or blocked condensate drain. We have unfrozen the condensate pipe but are still getting the same failure. It will ignite for 10 seconds then cuts out. It will attempt this 3 times then the fault light will start flashing again and we have to reset it. We have checked the lead on top of the condensate trap. Can the cold weather affect PCB or flame detection electrode?

IP Logged

thescruff Global Moderator Trade Member Author Offline Who said plumbing was easy. Posts: 6037 Total Thanks: 147 For This Post: 0 Gender: Trade: Plumber	Re: Baxi 105 HE flame failure Reply #1 - Jan 9^th, 2010, 5:28pm Disconnect the condense pipe and see if you can blow through it.
Back to top	IP Logged

CATTIG GDPR opt-out Total Thanks: 147 For This Post: 0	Re: Baxi 105 HE flame failure Reply #2 - Jan 9^th, 2010, 5:33pm Thanks We have done that and it's clear.
Back to top	IP Logged

raynos GDPR opt-out Total Thanks: 147 For This Post: 0	Re: Baxi 105 HE flame failure Reply #3 - Nov 28^th, 2010, 3:32pm Hi I am having the same problem, I presume you got it sorted by now... what was your result?
Back to top	IP Logged

Pages: 1

(Moderator: thescruff) - (Moderator Group: Board Moderator)

< Previous Topic | Next Topic >

Ask The Trades › DIY Forum › Plumbing Questions › Baxi 105 HE flame failure