Ask The Trades - oil boilers - fitting a pipe stat

Welcome, Guest. Please Login or Register

	Jan 31^st, 2026, 4:57pm
View recently thanked users View top thanked users

Quote: The hardness of the butter is proportional to the softness of the bread

Ask The Trades › DIY Forum › Plumbing Questions › oil boilers - fitting a pipe stat

(Moderator: thescruff) - (Moderator Group: Board Moderator)

< Previous Topic | Next Topic >

Pages: 1

oil boilers - fitting a pipe stat (Read 5643 times)

baffman

GDPR opt-out

oil boilers - fitting a pipe stat
Feb 21^st, 2011, 5:44pm

Hi there

During the recent spell of cold weather our boiler has been going on and off a lot of the time due to the cold temperatures. We have a frost stat that is fitted as the boiler is in the garage and this i believe has been controlling the boiler.

If i was to fit a pipe stat on the return to the burner, im assuming this would reduce the amount of cycling on and off. I understand that it would still happen, just not as often.

My question is how do i wire a pipe stat in? We have a y-plan system and the boiler is a thermecon option 40/60

thanks for any help

cheers
baff

IP Logged

londonman Trade Member Offline I love YaBB 1G - SP1! Posts: 1697 Total Thanks: 13 For This Post: 0 Malvern United Kingdom Trade: Cabinet Maker	Re: oil boilers - fitting a pipe stat Reply #1 - Feb 21^st, 2011, 9:54pm I'm not an expert but it sounds to me as if the frost stat is doing what it is supposed to do! Otherwise your boiler will freeze up.
Back to top	Would all Third Party Apologists kindly mind their own business ..... IP Logged

thescruff Global Moderator Trade Member Author Offline Who said plumbing was easy. Posts: 6037 Total Thanks: 147 For This Post: 0 Gender: Trade: Plumber	Re: oil boilers - fitting a pipe stat Reply #2 - Feb 21^st, 2011, 10:24pm Fit the pipe stat on the heating return. To wire it you just interrupt the the feed to the frost stat, so it's in line.
Back to top	IP Logged

baffman GDPR opt-out Total Thanks: 147 For This Post: 0	Re: oil boilers - fitting a pipe stat Reply #3 - Feb 22^nd, 2011, 9:48am do i just wire it into the control box in the same place that the frost stat is wired into? tks baff
Back to top	IP Logged

thescruff Global Moderator Trade Member Author Offline Who said plumbing was easy. Posts: 6037 Total Thanks: 147 For This Post: 0 Gender: Trade: Plumber	Re: oil boilers - fitting a pipe stat Reply #4 - Feb 22^nd, 2011, 11:36am Take the feed wire to the frost stat, and stick it in the com (pipe stat) then from the pipe stat to the frost stat. Simply put the pipe stat is just an inline switch to the frost stat.
Back to top	« Last Edit: Feb 22^nd, 2011, 11:37am by thescruff » IP Logged

baffman GDPR opt-out Total Thanks: 147 For This Post: 0	Re: oil boilers - fitting a pipe stat Reply #5 - Feb 22^nd, 2011, 2:33pm so i dont need to go near the wiring box? Which wire from the frost stat is it and where does this go on the pipe stat, and where which wire from the pipe stat goes to the frost stat and where do i put it in the frost stat? sorry for the silly question
Back to top	IP Logged

Pages: 1

(Moderator: thescruff) - (Moderator Group: Board Moderator)

< Previous Topic | Next Topic >

Ask The Trades › DIY Forum › Plumbing Questions › oil boilers - fitting a pipe stat