Ask The Trades - Immersion heater timer switch

Welcome, Guest. Please Login or Register

	Feb 21^st, 2026, 7:16pm
View recently thanked users View top thanked users

Quote: Never look down on anybody unless you're helping him up - Jesse Jackson

Ask The Trades › DIY Forum › Electrical Questions › Immersion heater timer switch

(Moderator: Lectrician) - (Moderator Group: Board Moderator)

< Previous Topic | Next Topic >

Pages: 1

Immersion heater timer switch (Read 4993 times)

mwgary GDPR opt-out	Immersion heater timer switch Oct 21^st, 2012, 8:02pm I have immersion heater that is running off a 15amp circuit from the fuse box. The heater has a basic on/off switch, which i want to change to either a digital or mechanical timer, but I can only find ones that are 13amp. is it ok to use the 13amp timer on a 15amp cirtuit? all info much appreciated.
Back to top	IP Logged

Lectrician

Administrator
Trade Member
Author

Offline

Ask The Trades
Posts: 8815

Total Thanks: 109
For This Post: 0

Braunton, North Devon
United Kingdom
Gender: male

Trade: Electrician

Re: Immersion heater timer switch
Reply #1 - Oct 22^nd, 2012, 7:05am

That's fine, the circuit in 15amp, but the load is only 12-12.5 amps.

This type leaes your current switch in place and is wired into the flex from switch to heater:

http://www.tlc-direct.co.uk/Products/SMTS900.html

I prefer this type, which replaces your current switch completely:

http://www.tlc-direct.co.uk/Main_Index/Timers_Index/Immersion_Heater_Timers_1/in...

« Last Edit: Oct 22^nd, 2012, 7:08am by Lectrician »

Need to post a picture? Click HERE for info!

IP Logged

CWatters Super Member Offline "Daddy fick it" says James Posts: 5150 Total Thanks: 58 For This Post: 0 Gender:	Re: Immersion heater timer switch Reply #2 - Oct 22^nd, 2012, 7:27am Using Electricity is quite an expensive way to heat your hot water. If you have any other source of heating it's likely to be a lot cheaper to use that. Sorry if you know that already.
Back to top	IP Logged

Flashbang

Junior Member

Offline

I've been P'eeeeeeed
Posts: 117

Total Thanks: 0
For This Post: 0

Gender: male

Re: Immersion heater timer switch
Reply #3 - Oct 24^th, 2012, 8:04pm

Hi
If you have to use electricity to heat your water then have your meter converted to Economy 7.
Then install a local to the HW cylinder a time clock that switches 'On' the water heater only in the periods of economy 7.... i.e. Typically. Summer 11:30 to 01:30 and then between 03:30 & 08:30. Winter 22:30 to 00:30 then 02:30 to O7:30. These time may vary depending on the supplier.

IP Logged

Pages: 1

(Moderator: Lectrician) - (Moderator Group: Board Moderator)

< Previous Topic | Next Topic >

Ask The Trades › DIY Forum › Electrical Questions › Immersion heater timer switch