Welcome, Guest. Please Login or Register
Welcome To Ask The Trades!
May 18th, 2024, 2:34pm
Quote: Never look down on anybody unless you're helping him up - Jesse Jackson


Ask The Trades › DIY Forum › Plumbing Questions › Baxi Combi Instant 105e Hot Water problem
(Moderator: thescruff) - (Moderator Group: Board Moderator) < Previous Topic | Next Topic >
Page Index Toggle Pages: 1
Send Topic Print
Baxi Combi Instant 105e Hot Water problem (Read 1544 times)
Top43
GDPR opt-out
Baxi Combi Instant 105e Hot Water problem
Feb 10th, 2013, 10:58am  
The hot water does not get hot enough is only luke warm.  In addition when the hot water is turned on the heating flow gets hot and the overflow is constantly dripping when the boiler is on the pressure gauge is reading upto 3 bar.  The heat exchanger has been flushed but to no effect, can anyone  suggest anything
Back to top
 
 
IP Logged
 
thescruff
Global Moderator
Trade Member
Author
*****
Offline

Who said plumbing was
easy.
Posts: 6037


Total Thanks: 147
For This Post: 0


Gender: male

Trade: Plumber
Re: Baxi Combi Instant 105e Hot Water problem
Reply #1 - Feb 11th, 2013, 1:01am  
Hi, Sounds like 3 problems.

Blocked Plate hx.

Diverter valve.

Expansion vessel has lost it's pre-charge or duff.
Back to top
 
Thank User For This Post View members image gallery  
IP Logged
 
Page Index Toggle Pages: 1
Send Topic Print
(Moderator: thescruff) - (Moderator Group: Board Moderator) < Previous Topic | Next Topic >
Ask The Trades › DIY Forum › Plumbing Questions › Baxi Combi Instant 105e Hot Water problem

Ask The Trades » Powered by YaBB 2.3!
YaBB © 2000-2008. All Rights Reserved.

Valid RSS Valid XHTML Valid CSS Powered by Perl Source Forge