Ask The Trades - Osma Gold

Welcome, Guest. Please Login or Register

	May 3^rd, 2024, 2:25pm
View recently thanked users View top thanked users

Quote: Going to church doesn't make you a Christian any more than standing in a garage makes you a car

(Moderator: thescruff) - (Moderator Group: Board Moderator)

Pages: 1

Osma Gold (Read 7804 times)

CWatters Super Member Offline "Daddy fick it" says James Posts: 5150 Total Thanks: 58 For This Post: 0 Gender:	Osma Gold Jun 28^th, 2014, 6:41pm I believe the plastic hot and cold water pipes in my house are "Osma Gold". Can't see that on the Osma/Wavin web site. Anyone know if it's compatible with their current product (Hep₂0) or better still JG Speedfit which I can get from Screwfix. I need to add some isolation valves.
Back to top	IP Logged

thescruff Global Moderator Trade Member Author Offline Who said plumbing was easy. Posts: 6037 Total Thanks: 147 For This Post: 0 Gender: Trade: Plumber	Re: Osma Gold Reply #1 - Jun 28^th, 2014, 11:11pm Not seen osma gold, but I would expect it to be a standard size, only thing I would say is use osma inserts or try the speedfit with the orings to see if they are a tight fit. The alternative is compression
Back to top	IP Logged

CWatters Super Member Offline "Daddy fick it" says James Posts: 5150 Total Thanks: 58 For This Post: 0 Gender:	Re: Osma Gold Reply #2 - Jun 29^th, 2014, 8:22am Thanks.
Back to top	IP Logged

CWatters Super Member Offline "Daddy fick it" says James Posts: 5150 Total Thanks: 58 For This Post: 0 Gender:	Re: Osma Gold Reply #3 - Jun 29^th, 2014, 5:22pm Do you happen to know if Hep20 connectors are supplied with inserts for their pipe (Hep20 pipe) or do you have to order them separately?
Back to top	IP Logged

woodsmith Global Moderator Trade Member Author Offline Posts: 4395 Total Thanks: 135 For This Post: 0 Gender: Trade: Joiner	Re: Osma Gold Reply #4 - Jun 29^th, 2014, 5:45pm You normally buy them separately. Speedfit seem to have completely overtaken Hepworth and the inserts are very different. If in doubt I would use a compression fitting but then you would still need inserts.
Back to top	IP Logged

Pages: 1

(Moderator: thescruff) - (Moderator Group: Board Moderator)