Welcome To Ask The Trades!

Quote: I used to eat a lot of natural foods until I learned that most people die of natural causes.
  HomeHelpSearchLoginRegisterPM to admin  
 
Page Index Toggle Pages: 1
Send Topic Print
Old Kitchen sink leak. Now fixed. Do i replaster? (Read 128 times)
woodsmith
Global Moderator
Trade Member
Author
*****
Offline


Posts: 4237
Total Thanks: 99
For This Post: 0


Gender: male

Trade: Joiner

Re: Old Kitchen sink leak. Now fixed. Do i replaster?
Reply #1 - Mar 10th, 2018, 8:42am
 
I'd draw a line across the wall 50mm down from the top of the worktop and then knock all the plaster off below the line. That should expose more of the copper pipes and may let you see if the corroded one is disconnected. You then need to ensure the wall has completely dried out before you put the cabinet back otherwise you will have mould problems later. I wouldn't replaster it's just introducing more water onto the wall. Depending on how the cabinet fits you may need to fit some spacers on the wall, I'd use a bit of roofing lath as its tanalised.

Ventilating the plinth is a good idea, rather than fitting vents a better option may be to cut the plinth down by 25mm in height over a good part of its length. You should be able to make it look neat and is largely invisible once fitted.
Back to top
 


Thank User For This Post View members image gallery  
IP Logged
 
danielg
Newbie
*
Offline

Ask The Trades
Posts: 1
Total Thanks: 0
For This Post: 0



Old Kitchen sink leak. Now fixed. Do i replaster?
Mar 9th, 2018, 4:47pm
 
I moved into a ground floor victorian terrace 6 months ago. The first day i moved in i noticed there was no cold water out of the kitchen tap. I looked under the cupboard and apart from the unbelievably strong damp smell i noticed the cold water valve had been completely corroded shut due to a small leak. I replaced this and fixed the leak but to be honest god knows how long the previous owners left this like that.

I'm now replacing bits of the kitchen, and ive bought a replacement cabinet for the mouldy old one. So ive taken the old one apart, and taken off the work surface to see what damage the leak had caused. Im just a bit concerned with what i now see.

There is a 15mm copper cold feed pipe that is half plastered into the wall, There is some old old gas copper pipe (im assuming its gas) that has completely corroded through leaving a big old hole. this alarmed me, but im assuming its ok as there is no smell of gas, and its been like that for a long time by the looks of things so surely its out of use. I tried seeing where it leads to, but cant see as its been plastered straight over.

I have chipped off the flaking top coat of plaster. i've tested the remaining plaster for moisture with a meter and some places are reading 50%. ive got a dehumidifier running on it now. Its in a corner and one of the walls is an outside brick wall, where the high moisture readings are coming from.

My idea is to just leave it open so it can fully dry out. Its going to covered by the new worktop and cabinet, so looks wise i'm not worried. Should i try and replaster it or leave it to breath. Ill put a vent in the kitchen plinth and try and keep air flowing.

Cheers

under sink wallunder sink wall 2Kitchen pipes annotated
Back to top
 
Thank User For This Post View members image gallery  
IP Logged
 
Page Index Toggle Pages: 1
Send Topic Print