Welcome, Guest. Please Login or Register
Welcome To Ask The Trades!
May 5th, 2024, 9:34pm
Quote: People never say 'It's only a game' when they're winning.


Ask The Trades › DIY Forum › Building Questions › pergola rafter centres
(Moderator: TIMBA-WOLF) - (Moderator Group: Board Moderator) < Previous Topic | Next Topic >
Page Index Toggle Pages: 1
Send Topic Print
pergola rafter centres (Read 1620 times)
typical.me
GDPR opt-out
pergola rafter centres
Aug 1st, 2005, 1:07am  
Sorry to bug you again!!
Anyone any advice on centres for rafters on this to keep in symmetary?
8'x6' pergola
4"x4" x8' uprights
6"x2" rafters
rafters will be running the 8' length
thanx for yor previous info
mick
Back to top
 
 
IP Logged
 
JerryD
GDPR opt-out
Re: pergola rafter centres
Reply #1 - Aug 1st, 2005, 9:04pm  
400 centres looks about right but you'll have to work this out with the actual size you have.  Start measuring out from the centre to get even measurements at each end.

Remember at the centre you can either have a rafter or the centre of a gap.

Hope you understand  Undecided
Back to top
 
 
IP Logged
 
Page Index Toggle Pages: 1
Send Topic Print
(Moderator: TIMBA-WOLF) - (Moderator Group: Board Moderator) < Previous Topic | Next Topic >
Ask The Trades › DIY Forum › Building Questions › pergola rafter centres

Ask The Trades » Powered by YaBB 2.3!
YaBB © 2000-2008. All Rights Reserved.

Valid RSS Valid XHTML Valid CSS Powered by Perl Source Forge