Ask The Trades - Bleeding pump

Welcome, Guest. Please Login or Register

	Apr 20^th, 2026, 9:15am
View recently thanked users View top thanked users

Quote: If everything seems to be going well, you have obviously overlooked something.

(Moderator: thescruff) - (Moderator Group: Board Moderator)

Pages: 1

Bleeding pump (Read 1626 times)

markadams Junior Member Offline Posts: 14 Total Thanks: 0 For This Post: 0 Gender:	Bleeding pump Nov 8^th, 2005, 11:32am Hi, I have just refilled my open vented system after adding a couple of new rads, the rads have bleed fine and then I came to bleed the pump and found that it is an old "SMC Cadet 'S'" which does not appear to have a bleed valve. Can you tell me how to vent\bleed a pump which does hot have a bleed valve? Thank you Mark.
Back to top	« Last Edit: Nov 8^th, 2005, 11:40am by markadams » IP Logged

JerryD GDPR opt-out Total Thanks: 0 For This Post: 0	Re: Bleeding pump Reply #1 - Nov 8^th, 2005, 9:48pm Usually the pump will be self venting due to its position and orientation in the pipework, you only need to bleed air out of the rads.
Back to top	IP Logged

Pages: 1

(Moderator: thescruff) - (Moderator Group: Board Moderator)