Ask The Trades - Router Bits

Welcome, Guest. Please Login or Register

	May 15^th, 2024, 8:16am
View recently thanked users View top thanked users

Quote: Don't tell me the sky's the limit when there are foosteps on the moon - Paul Brandt

Ask The Trades › DIY Forum › Carpentry Questions › Router Bits

(Moderators: TIMBA-WOLF, woodsmith, big_all) - (Moderator Group: Board Moderator)

< Previous Topic | Next Topic >

Pages: 1

Router Bits (Read 1823 times)

new_boy GDPR opt-out	Router Bits Feb 27^th, 2006, 1:38am Hi Does anyone know where I can get a router bit to make an inlay patern on the front of wardrobe doors. I am thnking flat bottom and rounded edges at 3-4 mm deep, and to run around a template Is this possible ??? ???
Back to top	IP Logged

big_all

Global Moderator
Trade Member
Author

Offline

heeelllooo
Posts: 5596

Total Thanks: 10
For This Post: 0

Gender: male

Trade: Joiner

Re: Router Bits
Reply #1 - Feb 27^th, 2006, 7:35am

heeellllooo new boy Grin

the depth is governed by how much you plunge the router

personaly if your going for a decorative groove i would go for a "v"groove or 6mm round bit
they give a bit more carricter

and go clockwise if you using the inside of a template Wink

or do you mean something allong these lines!!!!!
http://trend.industrialsuperstore.co.uk/finder.php?range=all&cutter_type=ogee_&s...

« Last Edit: Feb 27^th, 2006, 7:44am by big_all »

big all --------------- we are all still learning

IP Logged

new_boy GDPR opt-out Total Thanks: 10 For This Post: 0	Re: Router Bits Reply #2 - Feb 28^th, 2006, 1:18pm Cheers Big_all The link for the bits was more of what i was looking at. I will have a proper look later Thanks again
Back to top	IP Logged

Pages: 1

(Moderators: TIMBA-WOLF, woodsmith, big_all) - (Moderator Group: Board Moderator)

< Previous Topic | Next Topic >

Ask The Trades › DIY Forum › Carpentry Questions › Router Bits