Ask The Trades - Oak Angle/Corner Bead

Welcome, Guest. Please Login or Register

	Apr 26^th, 2026, 10:55am
View recently thanked users View top thanked users

Quote: Life is sexually transmitted.

Ask The Trades › DIY Forum › Carpentry Questions › Oak Angle/Corner Bead

(Moderators: woodsmith, TIMBA-WOLF, big_all) - (Moderator Group: Board Moderator)

< Previous Topic | Next Topic >

Pages: 1

Oak Angle/Corner Bead (Read 6539 times)

AndyOlds Junior Member Offline Posts: 87 Total Thanks: 0 For This Post: 0 Whitley bay United Kingdom Gender:	Oak Angle/Corner Bead Nov 23^rd, 2007, 2:29pm Afternoon, I'm trying to get hold of a bit of light oak angle bead - about 20mm x 20mm external size. Can't seem to find it anywhere. Does anyone know of any likely suppliers in the North Tyneside / Newcastle area? I only need a single 8 foot length, otherwise I could get the local timber merchant to make me some up. Cheers, Andy.
Back to top	IP Logged

sparky415 Trade Member Offline Its more complicated than I first thought Posts: 679 Total Thanks: 0 For This Post: 0 Gender: Trade: Electrician	Re: Oak Angle/Corner Bead Reply #1 - Nov 23^rd, 2007, 8:04pm Andy, Couldn’t you make a bit? I made myself some small bits saved lots of money not having to buy it, Obviously I needed to buy myself a 2kw router to do the job
Back to top	IP Logged

AndyOlds Junior Member Offline Posts: 87 Total Thanks: 0 For This Post: 0 Whitley bay United Kingdom Gender:	Re: Oak Angle/Corner Bead Reply #2 - Nov 24^th, 2007, 9:05am I did think of that actually. I've got a cheap router, so it's not out of the question. I'd much rather just buy a bit though!
Back to top	IP Logged

big_all

Global Moderator
Trade Member
Author

Offline

heeelllooo
Posts: 5596

Total Thanks: 10
For This Post: 0

Gender: male

Trade: Joiner

Re: Oak Angle/Corner Bead
Reply #3 - Nov 24^th, 2007, 2:16pm

richard burbidge do lots of [expensive ]mouldings

http://www.richardburbidge.co.uk/main.asp?page=48

i am with sparky 415 0n this

take a large section of oak say 4x2 par[95x20] mould the edge you want then run through the circular saw to cut off the moulding

if its an "L" shape mouldingyou can easily do it on a table saw if it has a seperate gaurd and riving knife if not a spot of cleaning is in hand Roll Eyes

big all --------------- we are all still learning

IP Logged

AndyOlds Junior Member Offline Posts: 87 Total Thanks: 0 For This Post: 0 Whitley bay United Kingdom Gender:	Re: Oak Angle/Corner Bead Reply #4 - Nov 26^th, 2007, 1:50pm Cheers for the link big_all. I'll have a look at the site. Failing that, I'll be getting the router out of its box....
Back to top	IP Logged

sparky415 Trade Member Offline Its more complicated than I first thought Posts: 679 Total Thanks: 0 For This Post: 0 Gender: Trade: Electrician	Re: Oak Angle/Corner Bead Reply #5 - Nov 26^th, 2007, 4:50pm Andy, Make sure the bits are in tight! They don’t half wiz around the workshop (my garage) That was f***ing close
Back to top	IP Logged

Pages: 1

(Moderators: woodsmith, TIMBA-WOLF, big_all) - (Moderator Group: Board Moderator)

< Previous Topic | Next Topic >

Ask The Trades › DIY Forum › Carpentry Questions › Oak Angle/Corner Bead