Ask The Trades - Blades for `older` model B&D jigsaw

Welcome, Guest. Please Login or Register

	May 19^th, 2024, 6:28am
View recently thanked users View top thanked users

Quote: The sooner you fall behind, the more time you'll have to catch up.

Ask The Trades › DIY Forum › Carpentry Questions › Blades for `older` model B&D jigsaw

(Moderators: TIMBA-WOLF, woodsmith, big_all) - (Moderator Group: Board Moderator)

< Previous Topic | Next Topic >

Pages: 1

Blades for `older` model B&D jigsaw (Read 1860 times)

juco

Full Member

Offline

Ask The Trades
Posts: 183

Total Thanks: 0
For This Post: 0

Gender: male

Blades for `older` model B&D jigsaw
Apr 21^st, 2008, 12:00pm

I have a Black and decker jigsaw circa 1985
Its (I think) a DN535S Model S5K30

Does anyone know what type of blades (or equivelent) I can use with it and who stocks them. I emailed B&D but no response as yet.

I have already bought 1 pack that dont fit. The blade is the type that has like a semi circle hole at the very end thats fits into the jigsaw.

thanks

Juco

IP Logged

big_all Global Moderator Trade Member Author Offline heeelllooo Posts: 5596 Total Thanks: 10 For This Post: 0 Gender: Trade: Joiner	Re: Blades for `older` model B&D jigsaw Reply #1 - Apr 21^st, 2008, 3:21pm is this the one !!!!!!! http://www.mtmc.co.uk/prodtype.asp?PT_ID=12707517&strPageHistory=cat is the clamp loose when you try and insert !! may need rotating to 90 degrees to insert!!! if its a tight clamp may be worth rubbing the the side of the blade with sandpaper to reduce the thickness slightly
Back to top	« Last Edit: Apr 21^st, 2008, 3:26pm by big_all » big all --------------- we are all still learning IP Logged

juco Full Member Offline Ask The Trades Posts: 183 Total Thanks: 0 For This Post: 0 Gender:	Re: Blades for `older` model B&D jigsaw Reply #2 - Apr 21^st, 2008, 3:36pm Thanks for the reply. Yes that looks like the one, Iwill try and sand the sides sligthly as it does seem that the blades I have are just a paint thickess too thick. Thanks for the link and advice.
Back to top	Juco IP Logged

Pages: 1

(Moderators: TIMBA-WOLF, woodsmith, big_all) - (Moderator Group: Board Moderator)

< Previous Topic | Next Topic >

Ask The Trades › DIY Forum › Carpentry Questions › Blades for `older` model B&D jigsaw