Ask The Trades - Ports Module

Welcome, Guest. Please Login or Register

	Apr 29^th, 2024, 8:19am
View recently thanked users View top thanked users

Quote: War does not determine who is right - only who is left

Ask The Trades › DIY Forum › Alarms, Phones, Aerials, CCTV & Datacomms › Ports Module - BT Versatility

(Moderator: Lectrician) - (Moderator Group: Board Moderator)

< Previous Topic | Next Topic >

Pages: 1

Ports Module - BT Versatility (Read 2313 times)

gurk

GDPR opt-out

Ports Module - BT Versatility
Apr 18^th, 2013, 6:24pm

Hi,

I've just installed a Ports Module into a Versatility system, but the new extensions don't appear to be working, they're not appearing in the handset menus and are greyed out in the Versatility Wizard software.

It's hard to tell whether the Ports Module is actually working as it has no LEDs to indicate whether it's receiving power or not.

Am I missing something obvious?

IP Logged

davie GDPR opt-out	Re: Ports Module - BT Versatility Reply #1 - Apr 22^nd, 2013, 8:13am Can,t you tap over the ports with your butt , & see if there is any DT /Data ? My guess is that the vers isn't seeing the module.The connector isn't that great . Take the module off , then re-install it
Back to top	IP Logged

gurk GDPR opt-out	Re: Ports Module - BT Versatility Reply #2 - Jul 1^st, 2013, 11:31pm Got the extensions working, thanks! After tapping the ports I noticed the main CCU wasn't sitting in its correct position, it had slid to left so the backplane wasn't properly connected.
Back to top	IP Logged

Pages: 1

(Moderator: Lectrician) - (Moderator Group: Board Moderator)

< Previous Topic | Next Topic >

Ask The Trades › DIY Forum › Alarms, Phones, Aerials, CCTV & Datacomms › Ports Module - BT Versatility