Sandy
|
Thanks Woodsmith.
Yes, my requirements are certainly broader than I believe there are tools for. The more I look at it and the more I hear from you, the more my mind is moving away from the Lamello and more towards the Domino.
I see there is the DF700 giving 8, 10, 12 & 14mm Dominos and then the DF500 offering 4, 5, 6, 8 and 10mm Dominos. What's your view on using the larger sizes compared to the smaller ones? I would not be able to afford both machines to give me the variety of using 4mm through to 14mm, so I would have to choose one or the other.
My own logic would suggest that the smaller size Dominos would be for smaller stock material that would in turn be used in items less prone to stresses, so I would think that standard biscuits could be used. Thereby meaning that items requiring joints prone to larger stresses and strains would benefit form the larger Dominos. In short, I'm suggesting that the machine using the larger Dominos might be usable in more applications. Would that be fair to say?
Also, did you make any comparison between the Domino and something like the Mafell Duo Doweller? If so, what swayed you towards Dominos?
Thanks again.
|