HandyJon
|
HippeChippie, if you do want to follow the light source then measure the room carefully and see if you will end up with a narrow piece on the final run. If it looks like you will, make the first run narrower by sawing along the length.
Greg, when I do under architraves where the last row is against the door (and I try and start with a door usually) then I will click the board in at the side of the door, and then slowly and carefully hammer it so that the whole board slides along till it's in place under the door. Don't forget to use an offcut to stop you damaging the piece when hammering. Then I fit the rest of the row.
|