Ask The Trades - hot water problem

Welcome, Guest. Please Login or Register

	May 2^nd, 2024, 12:37am
View recently thanked users View top thanked users

Quote: If the facts don't fit the theory, change the facts - Albert Einstein

Ask The Trades › DIY Forum › Plumbing Questions › hot water problem

(Moderator: thescruff) - (Moderator Group: Board Moderator)

< Previous Topic | Next Topic >

Pages: 1

hot water problem (Read 1556 times)

runninwata GDPR opt-out	hot water problem May 18^th, 2005, 8:01pm I have a problem with a thermostatic shower fed from a combi boiler sometimes( not all the time) the hot water loses temperature and the shower runs cold what could be causing this problem inlet water pressure at combi ok. Any suggestions at all would be appreciated. many thanks
Back to top	IP Logged

billythekid

Trade Member

Offline

I love YaBB 1G - SP1!

Posts: 3402

Total Thanks: 0
For This Post: 0

Trade: Plumber

Re: hot water problem
Reply #1 - May 19^th, 2005, 10:40pm

might be dirt in the thermostatic body of the shower stopping the valve from running smoothly, how old is it? Wouldnt hurt to strip it down and clean it up anyhow...
you say the hot water loses temperature and the shower runs cold, does the water lose temperature at another appliance, WHB for example, or did you just mean the shower gets cold now and again...?

btk

IP Logged

runninwata GDPR opt-out Total Thanks: 0 For This Post: 0	Re: hot water problem Reply #2 - May 27^th, 2005, 4:39pm thanks btk i have replaced divertor valve on combi all seems to be working fine now also cleaned filters etc.. so heres hoping cheers
Back to top	IP Logged

Pages: 1

(Moderator: thescruff) - (Moderator Group: Board Moderator)

< Previous Topic | Next Topic >

Ask The Trades › DIY Forum › Plumbing Questions › hot water problem