Ask The Trades - Shower trays

Welcome, Guest. Please Login or Register

	May 2^nd, 2024, 10:31am
View recently thanked users View top thanked users

Quote: They didn't know it was impossible, so they did it - Mark Twain

Ask The Trades › DIY Forum › Plumbing Questions › Shower trays

(Moderator: thescruff) - (Moderator Group: Board Moderator)

< Previous Topic | Next Topic >

Pages: 1

Shower trays (Read 5154 times)

CWatters Super Member Offline "Daddy fick it" says James Posts: 5150 Total Thanks: 58 For This Post: 0 Gender:	Shower trays May 27^th, 2005, 5:57pm Can anyone recommend a good source for stone cast shower trays (not acrylic filled with cement)? East Anglia or south east in general.
Back to top	IP Logged

bstyle

GDPR opt-out

Total Thanks: 58
For This Post: 0

Re: Shower trays
Reply #1 - May 27^th, 2005, 8:30pm

What size are you after?

I used to buy the cheap stone resin trays from Plumb Center (£30 for a 760mm) but I had so many trays where the actual base came out further than the sides that I decided to only fit Alstone trays. Same as a normal stone resin Tray but the finish seems to be so much better. You can level up 2 sides and then the other 2 are good aswell.

What area are you ?

IP Logged

CWatters

Super Member

Offline

"Daddy fick it" says James

Posts: 5150

Total Thanks: 58
For This Post: 0

Gender: male

Re: Shower trays
Reply #2 - May 28^th, 2005, 1:01pm

I'm building near Huntingdon but live in Belgium!. Won't be ordering for a few months but want to get my list of sources sorted out now while I have some spare time.

I'll be looking for three trays wich I think will be..
90x80
100x80
120x80

I'll take a look at the companies you mentioned.

Ideally I'm looking for shallow trays that can be mounted almost flush with the surface - so you step down 1-2" into them rather than up 4" or something like that. All the floors a beam and block + insulation and screed so it should be easy enough to do this.

IP Logged

Timmo Junior Member Offline Posts: 31 Total Thanks: 0 For This Post: 0	Re: Shower trays Reply #3 - May 28^th, 2005, 5:01pm PM sent to you
Back to top	IP Logged

bstyle GDPR opt-out Total Thanks: 0 For This Post: 0	Re: Shower trays Reply #4 - May 28^th, 2005, 5:40pm Have a look at the Bette super shallow trays, they are pressed steel and are fantasic trays to fit. http://www.bette.de/EN/
Back to top	IP Logged

Timmo Junior Member Offline Posts: 31 Total Thanks: 0 For This Post: 0	Re: Shower trays Reply #5 - May 28^th, 2005, 5:47pm Or if you can't read German!! http://www.bette.co.uk/
Back to top	« Last Edit: May 28^th, 2005, 7:33pm by Timmo » IP Logged

bstyle GDPR opt-out Total Thanks: 0 For This Post: 0	Re: Shower trays Reply #6 - May 28^th, 2005, 5:49pm Kein problem for me
Back to top	IP Logged

bstyle GDPR opt-out Total Thanks: 0 For This Post: 0	Re: Shower trays Reply #7 - May 28^th, 2005, 5:50pm If you click on both links, they are exactly the same anyway ???
Back to top	IP Logged

Timmo Junior Member Offline Posts: 31 Total Thanks: 0 For This Post: 0	Re: Shower trays Reply #8 - May 28^th, 2005, 6:29pm Quote: If you click on both links, they are exactly the same anyway Spooky.....the first time I clicked it came up in German now it comes up in English
Back to top	IP Logged

JerryD GDPR opt-out Total Thanks: 0 For This Post: 0	Re: Shower trays Reply #9 - May 28^th, 2005, 7:01pm Ziss iss most intearesting............
Back to top	IP Logged

Timmo Junior Member Offline Posts: 31 Total Thanks: 0 For This Post: 0	Re: Shower trays Reply #10 - May 28^th, 2005, 7:33pm .......................and now my link comes up in German ???
Back to top	« Last Edit: May 28^th, 2005, 7:34pm by Timmo » IP Logged

Pages: 1

(Moderator: thescruff) - (Moderator Group: Board Moderator)

< Previous Topic | Next Topic >

Ask The Trades › DIY Forum › Plumbing Questions › Shower trays