Welcome, Guest. Please Login or Register
Welcome To Ask The Trades!
Apr 22nd, 2026, 9:29am
Quote: If there is a 50-50 chance of getting something right, there is a 90% chance you will get it wrong.


Ask The Trades › DIY Forum › Carpentry Questions › Architrave corner block
(Moderators: woodsmith, TIMBA-WOLF, big_all) - (Moderator Group: Board Moderator) < Previous Topic | Next Topic >
Page Index Toggle Pages: 1
Send Topic Print
Architrave corner block (Read 3612 times)
Dolallytap
GDPR opt-out
Architrave corner block
Apr 5th, 2008, 5:43pm  
The idea behind the Architrave corner block is that it offers an alternative to mitring architraves around doors and windows etc. As a general rule they are 10mm wider than the architrave or trim they are accompanying, so if you are using a 70mm architrave then you will need a 80mm corner block.


www.practicaljoineryandcabinetryguides.co.uk/images/CornerBlocks.jpg
Back to top
 
 
IP Logged
 
Page Index Toggle Pages: 1
Send Topic Print
(Moderators: woodsmith, TIMBA-WOLF, big_all) - (Moderator Group: Board Moderator) < Previous Topic | Next Topic >
Ask The Trades › DIY Forum › Carpentry Questions › Architrave corner block

Ask The Trades » Powered by YaBB 2.3!
YaBB © 2000-2008. All Rights Reserved.

Valid RSS Valid XHTML Valid CSS Powered by Perl Source Forge