Welcome, Guest. Please Login or Register
Welcome To Ask The Trades!
Apr 25th, 2026, 5:46pm
Quote: Depression is merely anger without enthusiasm.


Pages: 1 2 
Send Topic Print
Compact Flourescents (Read 13721 times)
LSpark
Global Moderator
Trade Member
Author
*****
Offline


Posts: 8069


Total Thanks: 3
For This Post: 0


London, UK, United Kingdom
London, UK
United Kingdom

Gender: male

Trade: Electrician



Re: Compact Flourescents
Reply #17 - Feb 7th, 2009, 4:01am
 
Good advice CW, as I said before it's tricky to know without looking at it. Best advice is to call in an electrician and get it all checked out.
Back to top
 
Thank User For This Post View members image gallery  
IP Logged
 
RobS
Re: Compact Flourescents
Reply #18 - Feb 11th, 2009, 8:52pm
 
I have tested the ballasts by trying a bulb that starts in other ballasts, but not in the faile ones.  I have also tried inside the house.  I have had 5 lights woking for the last few weeks even during the cold weather so I don't think it is temperature related.  I have got a new set of bulbs and ballasts so will replace them all and try again.  The only thing I will do is check the transient voltage during switch-on.

Thanks for all your help.
Back to top
 
Thank User For This Post  
IP Logged
 
LSpark
Global Moderator
Trade Member
Author
*****
Offline


Posts: 8069


Total Thanks: 3
For This Post: 0


London, UK, United Kingdom
London, UK
United Kingdom

Gender: male

Trade: Electrician



Re: Compact Flourescents
Reply #19 - Feb 11th, 2009, 9:09pm
 
The only voltage your really interested in is the nominal voltage, which will fluctuate. They should have inbuilt surge protection if they are of good quality. I would certainly be wary about replacing them with the same make if you can help it.
Back to top
 
Thank User For This Post View members image gallery  
IP Logged
 
Zambezi
Re: Compact Flourescents
Reply #20 - Feb 25th, 2009, 4:42pm
 
I spoke to a guy today, who owns a shop that does Eco lighting (CFLs and LEDs). He said he would not recommend using standard CFL fittings outside.
They sell "external" fittings that keep the lamps ticking over at about 10% and then when the PIR/microwave picks up movement they ramp up to 100% brightness (they call it Lux Up technology). I guess the theory is that they are not starting up from cold each time and they keep themselves warmish.

They do a range of 18W pl-t CFL downlighters for internal use that can be dimmed (not a standard dimmer but uses standard wiring), up to 10 fittings on 1 dimmer switch. Which is a nice alternative to halogen spots.
www.greenlighting.co.uk
Back to top
 
Thank User For This Post  
IP Logged
 
LSpark
Global Moderator
Trade Member
Author
*****
Offline


Posts: 8069


Total Thanks: 3
For This Post: 0


London, UK, United Kingdom
London, UK
United Kingdom

Gender: male

Trade: Electrician



Re: Compact Flourescents
Reply #21 - Feb 25th, 2009, 4:53pm
 
There is probably truth in that suggestions Zamb, but bear in mind thousands of CFL's operate happily outside in the cold. The key point which can't be stressed enough is that they DONT like being switched on and off, particualrly in the cold.

If you bear that in mind then there is no problem, CFL is ideal for good bright economical light that is going to be on say 2-3 hours in one go, preferably longer. Anything else short duration, sensor activation etc then forget it.. has to be an alternative e.g. halogen/tungsten.
Back to top
 
Thank User For This Post View members image gallery  
IP Logged
 
RobS
Re: Compact Flourescents
Reply #22 - Mar 2nd, 2009, 12:28am
 
I replaced all the ballasts (with the same make) and the bulbs.  No failures yet!
Back to top
 
Thank User For This Post  
IP Logged
 
LSpark
Global Moderator
Trade Member
Author
*****
Offline


Posts: 8069


Total Thanks: 3
For This Post: 0


London, UK, United Kingdom
London, UK
United Kingdom

Gender: male

Trade: Electrician



Re: Compact Flourescents
Reply #23 - Mar 2nd, 2009, 1:11am
 
Let us know how you get on, particuarly if you have anymore problems etc!, but fingers crossed!
Back to top
 
Thank User For This Post View members image gallery  
IP Logged
 
RobS
Re: Compact Flourescents
Reply #24 - Mar 9th, 2009, 1:49pm
 
Well everything is still working OK.  Not sure what the cause was, but the only thing I can think of is the electrician didn't disconect the lights and did a resistance test.  When I spoke to him he assured me that he didn't do anything which could have caused it.  Alternatively there could have been a faulty ballast causing the problem.  Eitehr way so far so good!
Back to top
 
Thank User For This Post  
IP Logged
 
Pages: 1 2 
Send Topic Print