Welcome, Guest. Please Login or Register
Welcome To Ask The Trades!
May 6th, 2024, 12:09am
Quote: Why don't they just make mouse-flavored cat food?


Ask The Trades › DIY Forum › Alarms, Phones, Aerials, CCTV & Datacomms › Texacom Veritas VR8 Entry time
(Moderator: Lectrician) - (Moderator Group: Board Moderator) < Previous Topic | Next Topic >
Page Index Toggle Pages: 1
Send Topic Print
Texacom Veritas VR8 Entry time (Read 2374 times)
GJAMES
GDPR opt-out
Texacom Veritas VR8 Entry time
Mar 18th, 2011, 11:50pm  
Is it possible to change the amount of time on this unit from the first contact opening in the EE zone and the alarm activating the siren and strobe?  I'd like to reduce that time.

Many thanks.
Back to top
 
 
IP Logged
 
Lectrician
Administrator
Trade Member
Author
*****
Offline

Ask The Trades
Posts: 8814


Total Thanks: 109
For This Post: 0


Braunton, North Devon, United Kingdom
Braunton, North Devon
United Kingdom
Gender: male

Trade: Electrician
Re: Texacom Veritas VR8 Entry time
Reply #1 - Mar 19th, 2011, 7:35am  
Yes, but you would need to know what the engineer code has been set to.  Do you have this?  If you do not have the engineer code, the panel would need to be defaulted back to the factory settings which would then mean re-programming everything.
Back to top
 
Need to post a picture? Click HERE for info!
Thank User For This Post WWW View members image gallery  
IP Logged
 
Page Index Toggle Pages: 1
Send Topic Print
(Moderator: Lectrician) - (Moderator Group: Board Moderator) < Previous Topic | Next Topic >
Ask The Trades › DIY Forum › Alarms, Phones, Aerials, CCTV & Datacomms › Texacom Veritas VR8 Entry time

Ask The Trades » Powered by YaBB 2.3!
YaBB © 2000-2008. All Rights Reserved.

Valid RSS Valid XHTML Valid CSS Powered by Perl Source Forge