Home
|
Forum
|
How To Guides
|
About Us
|
Affiliates
|
Contact Us
Welcome, Guest. Please
Login
or
Register
Apr 29
th
, 2024, 7:39pm
View recently thanked users
View top thanked users
Quote:
Why is it one careless match can start a forest fire, but it takes a whole box to start a campfire?
Ask The Trades
›
DIY Forum
›
Alarms, Phones, Aerials, CCTV & Datacomms
› veritas R8
(Moderator: Lectrician) - (Moderator Group: Board Moderator)
<
Previous Topic
|
Next Topic
>
Pages: 1
veritas R8 (Read 3513 times)
paulpa
GDPR opt-out
veritas R8
Jul 11
th
, 2012, 9:02pm
Even though i have set Full Set entry Time (sec) to 30 it only gives me about 3-5 seconds before sounding alarm.
Conducted walk test and opening closing door activates the zone ok.
In the texacom R8 installation manual i can't see any other timer.........
Could it be i have to walk passed a PIR to get to keypad and that is setting it off?
EDIT: Now set the PIR i walk passed to inhibit entry rather than guard and works ok.
What exactly is the difference between inhibit entry and guard?
Also would like advice on how i set the system for part set, i.e have downstairs PIRs and door contacts active at night
Back to top
IP Logged
Lectrician
Administrator
Trade Member
Author
Offline
Ask The Trades
Posts: 8814
Total Thanks: 109
For This Post: 0
Braunton, North Devon
United Kingdom
Gender:
Trade: Electrician
Re: veritas R8
Reply #1 -
Jul 12
th
, 2012, 7:08am
Inhibited entry is what you need to set any PIR to that is on the entry route. This should only really be the hall detector. Any other detector should really be positioned to avoid this.
Any zone set to inhibited entry will respond as normal (guard) when the system is set, but will be ignored during the entry timer period.
Back to top
Need to post a picture? Click
HERE
for info!
IP Logged
paulpa
GDPR opt-out
Total Thanks: 109
For This Post: 0
Re: veritas R8
Reply #2 -
Jul 12
th
, 2012, 8:00am
Thanks
Back to top
IP Logged
Franco
GDPR opt-out
Total Thanks: 109
For This Post: 0
Re: veritas R8
Reply #3 -
Jan 26
th
, 2013, 3:05pm
Hi I'm trying to set this alarm system to delay when I go downstairs in the morning after part setting it during the night (at the moment the sensor triggers alarm as soon as I get close to the bottom of the stairs).
Any ideas how I would go about this please? Didn't set the system up so appreciate if any thoughts can be a little bit idiot proofed
Back to top
IP Logged
Lectrician
Administrator
Trade Member
Author
Offline
Ask The Trades
Posts: 8814
Total Thanks: 109
For This Post: 0
Braunton, North Devon
United Kingdom
Gender:
Trade: Electrician
Re: veritas R8
Reply #4 -
Jan 26
th
, 2013, 5:21pm
Do you know the engineer code? Can you obtain it from whoever set it up? Without this, you cannot easily make the changes. A full reset would be required to default the engineer code, and then the whole system re-programming.
Back to top
Need to post a picture? Click
HERE
for info!
IP Logged
Pages: 1
(Moderator: Lectrician) - (Moderator Group: Board Moderator)
<
Previous Topic
|
Next Topic
>
Ask The Trades
›
DIY Forum
›
Alarms, Phones, Aerials, CCTV & Datacomms
› veritas R8
Forum Jump »
Home
» 10 most recent Posts
» 10 most recent Topics
DIY Forum
- Electrical Questions
- Plumbing Questions
- Carpentry Questions
- Building Questions
- Painting, Decorating & Tiling Questions
- Alarms, Phones, Aerials, CCTV & Datacomms ««
Public Forum
- Just Talk
- Humour
- The Forum
- Trade Applications
Ask The Trades
» Powered by
YaBB 2.3
!
YaBB
© 2000-2008. All Rights Reserved.