Lectrician
|
Yes.
Two ways.
Easy way - Seperate the lights, and have the PIR just control one. Then, the remainder would be on a pull switch or wall switch......here's the "clever" bit. Use a DP switch (pull or wall). Use one pole to switch the group of lights, and the other pole to switch the single spot (parallel with the PIR switching contacts).
If using a wall switch, use a grid switch, as DP switches are not nice as light switches.
If you have a fancy wall switch, or a touch switch etc, you would use option 2 - A relay controlled by your switch, and the relay contacts wired as the DP switch above.
|