Ask The Trades - Removing PIR

Welcome, Guest. Please Login or Register

	Apr 26^th, 2024, 11:56am
View recently thanked users View top thanked users

Quote: Always forgive your enemies; nothing annoys them so much - Oscar Wilde

Ask The Trades › DIY Forum › Alarms, Phones, Aerials, CCTV & Datacomms › Removing PIR

(Moderator: Lectrician) - (Moderator Group: Board Moderator)

< Previous Topic | Next Topic >

Pages: 1

Removing PIR (Read 2191 times)

wozzy

Trade Member

Offline

Ask The Trades
Posts: 584

Total Thanks: 4
For This Post: 0

Gender: male

Trade: Electrician

Removing PIR
Aug 15^th, 2018, 5:27pm

Well not exactly removing i just dont want it to trigger a alarm as im intending on leaving a cat in the room, and i have little knowledge of these systems.

Its a menvier panel and i have the user code and nothing else, besides some installation record. the Zone on the paperwork is end of line does that mean i cant just chuck both alarm (if thats what you call them) in a NC terminal at the detector?

All advice is at least two years out of date.

IP Logged

Lectrician Administrator Trade Member Author Offline Ask The Trades Posts: 8814 Total Thanks: 109 For This Post: 0 Braunton, North Devon United Kingdom Gender: Trade: Electrician	Re: Removing PIR Reply #1 - Aug 15^th, 2018, 9:11pm Even if it is end of line wiring, just leave everything in the same terminals but add a link across the NC contacts in the PIR.
Back to top	Need to post a picture? Click HERE for info! IP Logged

CWatters Super Member Offline "Daddy fick it" says James Posts: 5150 Total Thanks: 58 For This Post: 0 Gender:	Re: Removing PIR Reply #2 - Aug 19^th, 2018, 6:52pm If it's temporary perhaps you could just cover the PIR sensor with something opaque to IR. Tin foil perhaps?
Back to top	IP Logged

Pages: 1

(Moderator: Lectrician) - (Moderator Group: Board Moderator)

< Previous Topic | Next Topic >

Ask The Trades › DIY Forum › Alarms, Phones, Aerials, CCTV & Datacomms › Removing PIR