Welcome, Guest. Please Login or Register
Welcome To Ask The Trades!
Nov 13th, 2024, 11:52am
Quote: I hate being bi-polar...its Brilliant!!!!


Page Index Toggle Pages: 1
Send Topic Print
Vintage riim lock (Read 3532 times)
Natedog
Full Member
***
Offline

Ask The Trades
Posts: 347


Total Thanks: 9
For This Post: 0


Swindon, United Kingdom
Swindon
United Kingdom


Vintage riim lock
Oct 22nd, 2018, 5:01pm
 
Sorry if this is the wrong board.  I figured carpentry was the closest.

Most of the doors in our house have still got the original rimlocks on them.  I've slowly been going round cleaning them up and repainting them as the look awful covered in gloss white.

This one has got an odd fault though.  When you open the door, the latchbolt pulls in too far and lifts slightly which stops it coming back out

Image 5

I've opened up the lock, and everything inside looks as per the others I have dismantled

Image 4

Anyone got any suggestions how to fix it? I'd rather not replace it as it is original from when the house was built
Back to top
 
Thank User For This Post WWW View members image gallery  
IP Logged
 
thescruff
Global Moderator
Trade Member
Author
*****
Offline

Who said plumbing was
easy.
Posts: 6037


Total Thanks: 147
For This Post: 0


Gender: male

Trade: Plumber



Re: Vintage riim lock
Reply #1 - Oct 23rd, 2018, 9:08am
 
The Pin is worn, you could try a shim to fill the gap.

More likely to be a problem with the handles, swap them with another set and try.
Back to top
 
Thank User For This Post View members image gallery  
IP Logged
 
woodsmith
Global Moderator
Trade Member
Author
*****
Offline


Posts: 4403


Total Thanks: 135
For This Post: 0


Gender: male

Trade: Joiner

Re: Vintage riim lock
Reply #2 - Oct 23rd, 2018, 11:03am
 
An option might be to make a U shaped packer, basically a rectangle with a square cut out. The square hole would be the same size as the bolt. If you then glued this to the inside face of the lock the bolt would not be able to slide inside the lock and jam as the shim would keep it square. If that makes sense.
Back to top
 
Thank User For This Post View members image gallery  
IP Logged
 
Natedog
Full Member
***
Offline

Ask The Trades
Posts: 347


Total Thanks: 9
For This Post: 0


Swindon, United Kingdom
Swindon
United Kingdom


Re: Vintage riim lock
Reply #3 - Oct 23rd, 2018, 10:06pm
 
The handle is just a brass knob either side.  It isn't screwed to the door like the downstairs ones are, so can't limit the movement.

I'll have a crack at making up a little something to go round it and see if that gets it
Back to top
 
Thank User For This Post WWW View members image gallery  
IP Logged
 
Page Index Toggle Pages: 1
Send Topic Print