heeelllooo h j
i made one for my brothers kids
it didnt fit them so they gave it to the rabbits[groan]
i used 12mm exterior ply
the top overhangs by 2 inches at the back
5 at the front 2 at the side
all made from ply except front wire framed door
make the door half an inch smaller than the opening
if you use chicken wire make shure the wire goes
all the way round[rolls al round the wood on all edges]
this will give the wood some protection
at the bottom make sure you plan to overlap the
sides and back by two and a half inches
make the base up with 2by 2 round all edges
which goes underneath
this give the sides somthing solid to fix to
it also gives you half inch overlap at the bottom
to shed water
if you want leggs just use 2by2 down each
corner through the base to the ground
i personaly used bricks
getting board now if you like any more info
just ask