Ask The Trades - Circular saw sharpening

Welcome, Guest. Please Login or Register

	May 14^th, 2024, 12:35am
View recently thanked users View top thanked users

Quote: You can keep quiet & let everyone think you're a fool or you can speak and confirm their thoughts.

(Moderators: big_all, woodsmith, TIMBA-WOLF) - (Moderator Group: Board Moderator)

Pages: 1

Circular saw sharpening (Read 2187 times)

CDplayer Junior Member Offline Posts: 7 Total Thanks: 0 For This Post: 0 Gender:	Circular saw sharpening Sep 20^th, 2004, 8:54am TCT circular saw blades go blunt sooner or later (or should that be sooner or sooner?) so what do folk do to resharpen them? I cannot believe that the answer is to buy a new blade. Thanks.
Back to top	IP Logged

woodsmith Global Moderator Trade Member Author Offline Posts: 4397 Total Thanks: 135 For This Post: 0 Gender: Trade: Joiner	Re: Circular saw sharpening Reply #1 - Sep 20^th, 2004, 9:23am Look in the Yellow pages under saw regrinding, they charge so much per tooth, last time I took mine I think it was about 40p/tooth. It is definately not a diy job. Depending on how bad they are and the quality of the blade you can normally resharpena blade 3-4 times.
Back to top	IP Logged

jasonB GDPR opt-out Total Thanks: 135 For This Post: 0	Re: Circular saw sharpening Reply #2 - Sep 20^th, 2004, 10:44am Most good tool shops and some hire shops offer this service, my local one hase a weekly turnround. As woodsmith says if its a decent blade with good size teeth you will get 4-5 regrinds out of it at about �10.00 a go, depending on number of teeth. If you only use cheap blades it may not be worth having them done. Jason
Back to top	IP Logged

CDplayer Junior Member Offline Posts: 7 Total Thanks: 0 For This Post: 0 Gender:	Re: Circular saw sharpening Reply #3 - Sep 20^th, 2004, 11:27am Thanks guys - that's me sorted.
Back to top	IP Logged

Pages: 1

(Moderators: big_all, woodsmith, TIMBA-WOLF) - (Moderator Group: Board Moderator)