TIMBA-WOLF
Board Moderator
Offline
Timba-Wolf..... Var@*sh, should be banned!!
Posts: 7158
Total Thanks: 15For This Post: 0
KENT,(under a tree!!!!) United Kingdom
Gender:
Trade: Joiner
|
As previously stated Scrit, i do really need to see the underside of the routerfor some sort of idea, in which direction to actually go... the uni base IS a good idea, IF you have cutters which have a long enough body, not shank!!! because even though it states 8mm thick, yes, maybe so , add the GB thickness on as well and the depth lost is increasing all the time, and as for the threaded bushings... (as per usual, the Yanks do it again, get a problem, and what do they do, SOLVE IT!!!!!! ) as for the fact the Gb's are imperial, if like me , i prefer to work in real measurements!!! ( then it should not be a problem, as most people do have metric/imperial conversion charts handy!!but like i say, get me a piccy and there may be an inner!!!!
|