Lectrician
|
I would always recommend the Texecom Veritas range. Go for the R8. This has a remote 'endstation' to be placed out of site in a utuility room, cupboard, next to the CU etc, and then has a small compact keypad to be placed by the main entry door.
PIR's should be placed to cover downstairs well, with a single PIR on a landing (not in your case). The main entry/exit door should ideally have some door contacts as these allow you to use final exit settings to kill the exit timer, and start the entry timer.
The R8 is adecent panel used by many reputable installers, but is also very user friendly, and installer friendly - The install manual goes through most things, and has diagrams etc.
The main things to consider are the battery - make sure you quote for one (7Ah ideally).
I would also always take a telephone cable to the panels location while wiring and lifting floors etc, as this allows for the addition of a dialler or even digicom in the future.
Use 6 core cable str wiring from the panel to every detector etc.
Place an external speaker centrally, and wire this with the 6 core too.
If you use a texecom bell box (and they are great too) then the wiring will be easier and more well explained in the manual.
When programming, look at 'inhibited entry' for your hall PIR, and final exit on your front door.
Not a lot more I can think of....
|